Maintenance Plan

Your heating and cooling system is a significant investment you can protect with Middleton Heat & Air's maintenance plan. It will provide you:

• Lower Utility Bills - The typical homeowner can actually have a savings of up to 30% on their utility bills annually just by keeping a properly maintained unit.
• Greater Safety - Saving you money is important, but nothing is more important than your family's safety. Every time Middleton's techs are in your home, they check for carbon monoxide. We recommend that you do not use either the air conditioner or furnace until you have had them checked and serviced each year.
• Healthier Indoor Air Quality – If someone in your family suffers from allergies or respiratory issues, we can definitely help “clean” your air.
• Improved System Efficiency – We replace components like clogged air filters, clean the condenser coil—in fact, we perform a 44 point annual Spring and Fall tune-up
• Fewer Repairs & Longer Equipment Life - You receive two annual services to clean and check your system.
• Preferred Customer Service – with priority scheduling and a 15% discount on repairs*. Also, you pay regular rates, rather than overtime, on calls made after normal operating hours.

Join our over 6,000 preferred maintenance agreement customers and receive our 44-point annual check up now!

SPRING

• CHECK COMPRESSOR AMPS
• CHECK CONDENSER FAN MOTER AMPS
• CHECK FAN BLADE
• OIL CONDENSER FAN MOTOR, IF REQUIRED
• CLEAN CONDENSER COIL
• CLEAN CONENSER CABINET
• CHECK CONTACTOR
• CHECK HIGH AND LOW PRESSURE SAFETY SWITCHES
• CHECK RELAYS AND CAPACITORS
• CHECK INSULATION ON REFIGERANT LINES
• CHECK AND CLEAN DRAIN LINE
• REPLACE FILTER WITH STANDARD DISPOSABLE FILTER
• CHECK BLOWER OPERATION
• CHECK DRAIN PANS
• CHECK THERMOSTAT
• CHECK ELECTRICAL DISCONNECT
• CHECK SCHRADER VALVES FOR LEAKS
• CHECK FOR SAFETY PAN FLOAT SWITCH OR INLINE OVER FLOW SWITCH
• CHECK CONDENSATE PUMP
• CHECK EVAPORATOR COIL IF ACCESSIBLE (ADDITIONAL CHARGES FOR CLEANING APPLY)
• CHECK REFRIGERANT CHARGE
• PERFORM VISUAL INSPECTION OF DUCT

FALL

• CLEAN AND CHECK BURNERS
• CLEAN AND CHECK HEAT EXCHANGER
• CHECK FLUE
• CHECK GAS VALVE
• CHECK AND CLEAN IGNITION AND IGNITOR ASEMBLY
• CLEAN FURNACE CABINET
• CHECK ALL FAN LIMIT AND SAFETY SWITHCHES
• OIL BLOWER MOTOR IF REQUIRED
• CLEAN AND CHECK THERMOCOUPLE
• CHECK HUMIDIFIER
• CHECK ELECTRICAL CONNECTIONS IN FURNACE
• REPLACE FILTER WITH STANDARD DIPOSABLE FILTER
• CHECK THERMOSTAT
• CHECK FOR GAS LEAK AT FURNACE
• PERFORM CARBON MONOXIDE TEST
• CHECK INLET AND OUTLET GAS PRESSURE
• CHECK BLOWER WHEEL IF ACCESSIBLE (ADDITIONAL COSTS APPLY FOR CLEANING)
• CHECK FURNACE CONDENSATE DRAIN IF REQUIRED
• CHECK FOR PROPER COMBUSTION AIR
• PERFORM VISUAL INSPECTION OF DUCT
• CHECK FURNACE AND FURNACE FLUE FOR PROPER CLEARANCE FROM COMBUSTIBLES
• CHECK FOR PROPERLY SIZED BREAKER